• Home
  • About GMT
  • Products
    Support Unit
    Coupling
    Slide Rail / Table
    Positioning Stage

    Standard Motorized Positioning Stage
    Precision Motorized Positioning Stage
    Precision Alignment Stage


    Precision Locknuts



    Precision Ballscrews
    XY Table
    Driver
    Stepping Motor  
    Linear Actuators
    Linear Drive
  • Distributors

GTMF-Typ

  • Precision Grinding Lock nut – 30° Locking
  • The locking direction of its brake screw is set at 30 degrees to coordinate with the screw angle so that the brake copper can tightly bond against the screw face to achieve more stabilized and accurate function.
  • No need of locking washer and keyway.
  • Correct assembly procedure and can also be repeatedly used.
  • Material - SCM 440 / Hardness - HRC 28-35
  • Accuracy - ISO 4H

Name DIN Material
GTMF25X1.5P ISO 4H SCM 440
GTMF30X1.5P ISO 4H SCM 440
GTMF35X1.5P ISO 4H SCM 440
GTMF40X1.5P ISO 4H SCM 440
GTMF45X1.5P ISO 4H SCM 440
GTMF50X1.5P ISO 4H SCM 440
GTMF55X1.5P ISO 4H SCM 440
GTMF60X1.5P ISO 4H SCM 440
GTMF65X1.5P ISO 4H SCM 440
GTMF70X1.5P ISO 4H SCM 440
GTMF75X1.5P ISO 4H SCM 440
GTMF80X2.0P ISO 4H SCM 440
GTMF85X2.0P ISO 4H SCM 440
GTMF90X2.0P ISO 4H SCM 440
GTMF95X2.0P ISO 4H SCM 440
GTMF100X2.0P ISO 4H SCM 440
GTMF110X2.0P ISO 4H SCM 440
GTMF120X2.0P ISO 4H SCM 440
GTMF130X3.0P ISO 4H SCM 440
GTMF140X3.0P ISO 4H SCM 440
GTMF150X3.0P ISO 4H SCM 440
GTMF160X3.0P ISO 4H SCM 440
GTMF170X3.0P ISO 4H SCM 440
GTMF180X3.0P ISO 4H SCM 440
GTMF190X3.0P ISO 4H SCM 440
GTMF200X3.0P ISO 4H SCM 440